Wolf Eyes T3 II
Throw: 125 metres
Beam Type: Reflector - spot surrounded by flood
Lumens: 1,400
Length: 157 mm
Secured with 256bit encryption
Australia Wide Delivery
See our returns policy for more info
Throw: 125 metres
Beam Type: Reflector - spot surrounded by flood
Lumens: 1,400
Length: 157 mm
Secured with 256bit encryption
Australia Wide Delivery
See our returns policy for more info
Lumens: 1,400 lumens
Throw: 125 metres
Length: 157 mm
Beam Type: Reflector – Spot surrounded by flood
The Wolf Eyes T3II Pro with its 3 LED head looks like something from the future and as if it would scare small children – which in fact does, some users deployed overseas claimed it created some interest and concern about it’s real nature amongst locals . The 3 LED s make the large 1,400 lumen output possible while the Procap gives you all the benefits of 6 levels of output.
Light Output and Beam Pattern
The 3 LEDs surprise the first time you turn them on, the output is just like a single LED with a bright centre spot and even flood surrounding. The 3 LEDs are so well aimed they combine to make an even beam. The smaller reflectors mean the T3II Pro is not a thrower of a light but one with a very strong midrange pool of light. Being reflectors it is a spot surrounded by flood beam but with a strong spot. There are 6 levels of output, high, med, med/low, low and fast strobe and slow strobe.
Procap
Like many of the Wolf Eyes LED torches the T3 II features the Procap, which allows you to select the level of light before turning on, or while the light is on. This works by a magnetic selector ring which is around the rear tailcap. Quite innovatively this does not turn the light off between levels when moving between them, so you aren’t left in the dark, even momentarily.
TTT and Construction
Constructed of aircraft aluminium which is wrapped around the TTT (Thermal Transfer Tube) the body is more than strong enough for the forces applied, meaning you should be using your torch for years to come. The TTT is designed to drag the damaging heat away from the LEDs and radiate it out through the body, important when you have 3 high output LEDs in close proximity to each other.
Regulation
Most torches dim slightly as the batteries dim, but not this Wolf Eyes torch. When the battery voltage drops the regulation unit increases the amperage so the LEDs are getting the correct amount of power, this way your torch doesn’t dim.
Rechargeable Batteries
Our evergreen LRB168A (18650) lithium ion battery is used in this torch as many other Wolf Eyes flashlights. This battery provides high power and also is protected, meaning there is a safety chip in the end controlling charging and discharging, all for your safety. You have probably seen those Youtube clips of notebooks catching fire or exploding, this ensures that won’t happen to you.
Cold Weather
Will work when frozen solid – see the pic inside the ice cube – do you work under the same conditions?
Australian Approved Charger
An Australian Approved Charger is supplied with your T3II Pro to ensure your safety and that all your insurances apply.
Waterproof
The T3 II Pro will work under light submersion.
Support
Your T3 II Pro LED rechargeable torch is fully supported in Australia. We have afull range of spares, required by our Police and Military contracts, we also have a 1300 911 007 number available to troubleshoot. This number even has 24 hour live answering for after hours concerns, which are then handled next business day.