Camelbak Ambush 3L Crux

PRODUCT FEATURES:

External fill access—allows for a quick refill without removing pack

Side-release shoulder straps for rapid removal

Multiple drink tube exit ports—for routing drink tube over the shoulder or under an arm

Noiseless zipper pulls

Top and bottom external zip pockets hold your essentials

Lightweight, durable 500D Cordura® Fabric

Why upgrade to a new CamelBak Mil Spec Crux™ reservoir when an old reservoir will last forever? Because we never stop innovating. Our Crux reservoir delivers 25% more water with every sip in a pack loaded with the latest in hydration technology.

PRODUCT SPECIFICATIONS:

Hydration Capacity: 100 oz (3 L)

Cargo Volume: 200 cu in (3.28 L)

Total Volume: 427 cu in (7 L)

Includes the 100 oz (3 L) Mil Spec Crux Short Reservoir with Quick Link™ Exit Port

Pack Weight: 1.1 lbs (.5 kg) with empty reservoir

Torso Length: 13.8 in (35 cm)

Materials: 500D Cordura® Fabric front panel, gusset and shoulder harness front side > 420D High Density Nylon on shoulder harness and back panel > 7 mm EVA foam shoulder harness > 210D Nylon lining > 5 mm Closed Cell PE foam on back panel and inside hydration compartment for insulation > Nylon webbing

Pack Dimensions: 16 x 10 x 6 in (40.6 x 25.4 x 15.2 cm)

Coyote, Foliage meet US Military standards for Near Infrared Reflectance (NIR)

PACK CLEANING

We recommend wiping your pack with a damp cloth to remove dirt. If the pack is extremely dirty and needs a deeper cleaning, soak it in cool or warm water with a very mild soap. Rinse the pack thoroughly with cool water. If soap residue remains in the fabric, it may create suds if exposed to water or sweat.

DO NOT wash your pack in a washing machine. Machine washing may damage the pack or affect the integrity of the fabric and fasteners, and will void the Got Your Bak™ Guarantee.

RESERVOIR CLEANING

The best way to care for your reservoir is to clean and dry it after every use, especially if you fill the reservoir with anything other than water. However, if a reservoir has not been cleaned after every use, and mold or discoloration develops:

Use hot water and a CamelBak Cleaning Tablet. (Or use 2 tablespoons of baking soda or bleach instead of CamelBak Cleaning Tab.) Mix the solution inside your reservoir and elevate the reservoir above the tube and Big Bite Valve. Pinch the bite valve, allowing the solution to flow into the drink tube and fill the bite valve.

Let the reservoir and cleaning solution sit in the reservoir and drink tube for about 30 minutes.

Wash the reservoir with hot water and mild soap. Be sure to completely rinse away the cleaning solution in the reservoir and drink tube before using again. You can also use CamelBak brushes from our Cleaning Kit to scrub your reservoir and drink tube. Brushes are the best way to ensure you are scrubbing all of the areas of the reservoir clean.

Once the reservoir is clean, be sure to air dry overnight so no moisture is trapped inside, which can cause mold to grow.

These steps will make your reservoir safe for use. If there are still spots left behind, these are permanent mold stains that may not be removable. However, your reservoir is still safe and usable after you’ve cleaned it